• Newsteo relay board, alarm relay

    Newsteo Relay, to transmit alarms to external devices

    The Newsteo Relay is a relay that can transmit an alarm detected by the RF Monitor software to another alarm equipment.
    This product allows connecting any alarm device, such as: a telephone warning system, an emergency rotating light, a siren … The Relay is compliant with the whole Newsteo range.

    Functionning

    The system installation is very simple:
      1. Connect the Relay to a USB port of the monitoring PC (PC on which the RF Monitor software is installed and on which the RF-to-USB Key is connected to)
    2. Connect the external alarm device to the Relay
    3. In the RF Monitor software, set the alert type that will be transferred to the Relay:
    Alert for exceeding the set thresholds
    Weak battery alert
    Radio transmission problem alert

    Its assets

    Fast and easy installation
    No battery (powered by the PC)
    Setting done through the RF Monitor software
  • RLB21 RLA21
    Operating mode Toggle (bistable) Active security *
    Operating temperature -20°C ... +70°C -20°C ... +70°C
    IP Level IP20 IP20
    Power supply Supplied by the USB connection Supplied by the USB connection
    Maximum tension of reception on the connectors 240 V 240 V
    Maximum current of reception on connectors 5A 5A
    Output 1 relay with 3 poles : 1 Normally-open (NO), 1 Normally-closed (NC) and 1 Common. 1 relay with 3 poles : 1 Normally-open (NO), 1 Normally-closed (NC) and 1 Common.


    * The active safety model switches the common position on the alert automatically in case of component failure or electrical blackout

  • crypto

    * Required Fields