• Newsteo Logger with temperature and humidity probe

    Newsteo Logger with temperature and humidity probe

    The Logger LGR32 is a datalogger that can be featured with an external temperature & humidity probe. The Logger whether transmits instantaneously the data to a RF Monitor, or stocks them into its onboard memory, waiting the download.

    Product references:

    LGR32: wireless recording and transmission device
    STH50 or STH55 (external temperature probe, directly connectable on the LGR32)

    Assets

    A compact design
    Miniature and easily integrate
    No wire, no plugs
    Easily removable

    Accurate wireless measures
    Very high precision of measure
    Wireless data transmission
    Wireless download of the recorded data
    Transfer through out the walls

    Freedom of use
    High battery autonomy
    High storage capacity

    How does it work ?

    1 - The Data Loggers
    They are spread in the area which has to be monitored. They send to the RF-to-USB key by radiofrequency the measures they take. They can be wireless configured and updated.

    2 - The RF-to-USB Key
    It is the bridge between the PC and the loggers

    3 - The RF Monitor
    This software is installed on the PC and allows the monitoring of the loggers

    The loggers can be used in two different modes:
    Recording

    Recording

    The logger records in its embedded memory the measures it takes. The user can download on the PC all the stored measures when he wants.


    Watch the video
    Monitoring

    Monitoring

    The logger sends in real time its measures to the PC. If a measure is not received by the PC, it stores it inside its internal memory and sends it to the PC on the next communication channel.

    Watch the video

  • Sensors Specifications

    LGR32
    PROBE STH50-003    		 LGR32
    PROBE STH55
    Probe Operating temperature - 40°C ... +125°C (extremity of the cable, where the sensor is)
    - 25°C ... +80°C (cable)     		- 25°C ... +80°C
    Accuracy +/- 0.2°C @ 0 to 60 °C +/- 0.3°C @25°C
    Resolution 0.08°C -
    Electronic board temperature Integrated temperature sensor on the LGR32 electronic board
    Humidity range of measure 0 ... 100%RH
    The maximum dew point is brought down to 80°C
    Dew formation resistant probe    		 0 ... 100%RH
    Probe in non-condensed atmosphere
    Accuracy Humidity +/- 1.8%RH
    (0 ... 80%RH)    		 +/- 2%RH
    (10 ... 90%RH)
    Casing Operating temperature -40°C to +85°C -40°C to +85°C
    Dew point temperature Yes Yes
    Certification COFRAC on order

    Casings Specifications



    Weight with battery
    250g

    Size
    98mm x 64mm x 34mm

    Battery
    AA (Lithium Thionyle) - 3,6V

    Antenna
    1/2 wave antenna (included)

    Casing
    Aluminium IP65

    Product Storage
    The product can be entirely set and then put in "hibernate" mode with its battery inserted. It will just be necessary to sweep a magnet on it to wake up it and to start the measurement.

    Encombrement Logger

    Other Specifications
    Memory Retention 100 years (flash memory technology)
    Battery Autonomy Up to 2 years (at 25°C with a frequency measure of 15 minutes)
    Measures Frequency Can be set from one measure every seconds to one every 4 hours
    Memory Capacity Up to 32 768 mesures with date and time.

  • STH50-003

    STH50-003

    Temperature measurement range : - 40 ... +125 °C, accuracy : ±0.2°C from 0 to 60 °C
    Humidity measurement range : 0 … 100 % (the maximum dew point is brought down to 80°C), dew formation resistant.
    Accuracy of ± 1.8% RH from 0 to 80 % HR.
    In factory calibration
    Sensor protected in a stainless steel tip
    Probe length : 5 meters

    STH55-001

    STH51
    Newsteo Probe integrating high accuracy temperature & humidity sensor
    Temperatre measurement range: -25°C ... +80°C, accuracy: ± 0.3°C @25°C
    Humidity measurement range: 0 to 100 %; (non-condensed atmosphere), accuracy:  2%RH (10 ... 90%RH)
    Probe length : 5 meters
    In factory calibration

  • EVALUATE THE NEWSTEO LOGGER WITH TEMPERATURE AND HUMIDITY PROBE !


    crypto

    * Required Fields