• Newsteo Logger with external temperature probe

    Newsteo Logger with temperature probe

    The Logger LGR36 is a datalogger that can be featured with an external +/-0.3°C accuracy temperature probe. The Logger whether transmits instantaneously the data to a RF Monitor, or stocks them into its onboard memory, waiting the download.

    Product references :

    LGR36 ( wireless transmission and measurement system)
    STE51 (external temperature probe, directly connectable on the LGR36)

    Assets

    A compact design
    Miniature and easily integrate
    No wire, no plugs
    Easily removable

    Accurate wireless measures
    Very high precision of measure
    Wireless data transmission
    Wireless download of the recorded data
    Transfer through out the walls

    Freedom of use
    High battery autonomy
    High storage capacity

    How does it work ?

    1 - The Data Loggers
    They are spread in the area which has to be monitored. They send to the RF-to-USB key by radiofrequency the measures they take. They can be wireless configured and updated.

    2 - The RF-to-USB Key
    It is the bridge between the PC and the loggers

    3 - The RF Monitor
    This software is installed on the PC and allows the monitoring of the loggers

    The loggers can be used in two different modes:
    Recording

    Recording

    The logger records in its embedded memory the measures it takes. The user can download on the PC all the stored measures when he wants.


    Watch the video
    Monitoring

    Monitoring

    The logger sends in real time its measures to the PC. If a measure is not received by the PC, it stores it inside its internal memory and sends it to the PC on the next communication channel.

    Watch the video

  • Sensors Specifications

    LGR36 - PROBE STE51
    Temperature - 40°C ... +60°C
    Resolution +/- 0.3°
    Electronic board temperature Integrated temperature sensor on the LGR36 electronic board
    Operating temperature (without probe) -40°C to +85°C
    Certification COFRAC on order

    Casings Specifications



    Weight with battery
    250g

    Size
    98mm x 64mm x 34mm

    Battery
    AA (Lithium Thionyle) - 3,6V

    Antenna
    1/2 wave antenna (included)

    Casing
    Aluminium IP65

    Product Storage
    The product can be entirely set and then put in "hibernate" mode with its battery inserted. It will just be necessary to sweep a magnet on it to wake up it and to start the measurement.

    Encombrement Logger

    Other Specifications
    Sensor Position Inside the casing
    Memory Retention 100 years (flash memory technology)
    Battery Autonomy Up to 2 years (at 25°C with a frequency measure of 15 minutes)
    Measures Frequency Can be set from one measure every seconds to one every 4 hours
    Memory Capacity Up to 32 768 mesures with date and time.

  • STE53-006

    STE53-006

    Temperature probe with integrated digital temperature sensor inside stainless steel tip
    Range of measure : - 40° to + 80°C
    Accuracy :
    +/- 0.3°C (-30°C ... +60°C)
    +/- 1°C (-40°C ... -30°C and +60°C...+80°C)
    IP68
    5 meters cable, 4.8mm diameter

    STE51-001

    STE51-001

    Temperature probe with integrated temperature sensor
    Range of measure : -40°C ... +60°C
    Accuracy :
    +/- 0.3°C (-30°C ... +60°C)
    +/- 1°C (-40°C ... -30°C)

    STE51-002

    STE51-002

    Temperature probe with integrated temperature sensor
    Range of measure : -40°C ... +80°C
    Accuracy :
    +/- 0.3°C (-30°C ... +60°C)
    +/- 1°C (-40°C ... -30°C and +60°C...+80°C)

  • Evaluate the Logger for external digital temperature probe


    crypto

    * Required Fields