• Newsteo Logger for wireless temperature supervision : Thermocouple K, N...

    Newsteo Logger for wireless Thermocouple

    The Newsteo Logger Thermocouple is a device which enables to connect a thermocouple probe to oversee at distance the temperature of an environment. Thanks to its compact design and its high autonomy, it makes easier the supervision in environments where temperature is a crucial factor. The Newsteo Logger Thermocouple can transfer the data directly on a monitoring computer by radio frequencies or can store the data in its memory.

    Product references:

    LGR37: this Logger is sold without sensor. You can connect by yourself the Thermocouple you want K, E, J, N, or T.
    STC01: thermocouple Newsteo K probe, directly connectable on the LGR37

    Assets

    A compact design
    Miniature and easily integrate
    No wire, no plugs
    Easily removable

    Accurate wireless measures
    Very high precision of measure
    Wireless data transmission
    Wireless download of the recorded data
    Transfer through out the walls

    Freedom of use
    High battery autonomy
    High storage capacity

    How does it work ?

    1 - The Data Loggers
    They are spread in the area which has to be monitored. They send to the RF-to-USB key by radiofrequency the measures they take. They can be wireless configured and updated.

    2 - The RF-to-USB Key
    It is the bridge between the PC and the loggers

    3 - The RF Monitor
    This software is installed on the PC and allows the monitoring of the loggers

    The loggers can be used in two different modes:
    Recording

    Recording

    The logger records in its embedded memory the measures it takes. The user can download on the PC all the stored measures when he wants.


    Watch the video
    Monitoring

    Monitoring

    The logger sends in real time its measures to the PC. If a measure is not received by the PC, it stores it inside its internal memory and sends it to the PC on the next communication channel.

    Watch the video

  • Technical Specifications

    Newsteo Logger for Thermocouple
    Possible Thermocouples K, R, S, B, E, J, N, G, C, D, T
    Temperature 100 % of the selected thermocouple range.
    Accuracy 0.1 to 0.5 °C, without sensor's accuracy
    Resolution 0,04 °C to 0,23 °C depending on the thermocouple
    Cold Junction Temperature Measured through a temperature sensor integrated on the electronic board.
    Operating temperature -40°C to +85°C
    Certification COFRAC on order

    Casings Specifications



    Weight with battery
    250g

    Size
    98mm x 64mm x 34mm

    Battery
    AA (Lithium Thionyle) - 3,6V

    Antenna
    1/2 wave antenna (included)

    Casing
    Aluminium IP65

    Product Storage
    The product can be entirely set and then put in "hibernate" mode with its battery inserted. It will just be necessary to sweep a magnet on it to wake up it and to start the measurement.

    Encombrement Logger

    Other Specifications
    Sensor Position Inside the casing
    Memory Retention 100 years (flash memory technology)
    Battery Autonomy Up to 2 years (at 25°C with a frequency measure of 15 minutes)
    Measures Frequency Can be set from one measure every seconds to one every 4 hours
    Memory Capacity Up to 32 768 mesures with date and time.

  • STC01-002

    STC01-02

    K type Thermocouple with 250 mm probe, class A
    Measurement range: -100°C to +1100°C
    Accuracy: class A : ± 0.004*temperature or ± 1.5 °C (take the biggest imprecision at the considered temperature )
    Supplied with the connector allowing to connect it to the Newsteo Logger LGR37 (CON05)

    STC01-003

    STC01-03

    K Type Thermocouple
    Measurement range: -75°C to +250°C
    Cable length: 5 meters
    Accuracy: A class : ± 0.004*temperature or ± 1.5 °C
    (take the biggest imprecision at the considered temperature)
    Supplied with the connector allowing to connect it to the Newsteo LGR37 (CON05)

    STC32-001

    Sonde STC32-001

    T Thermocouple with probe: 200 mm, diameter : 6 mm
    Measurement range: -185°C to + 200°C
    Cable length: 3 meters
    Supplied with the connector allowing to connect it to the Newsteo LGR37, the connector cannot be taken apart

    CON05

    CON05
    Connector to connect the thermocouple of your choice (K, E, J, N, T) to the Newsteo Logger.

  • Evaluate the Newsteo Logger thermocouple !

    This kit enables you to estimate the Newsteo Logger Thermocouple.

    Kit Thermocouple The kit is made of:

    A Newsteo Logger LGR37
    A Thermocouple type K probe (STC01-002)
    A RF-to-USB Key medium-range (¼ wavelength antenna integrated)
    A CD-ROM containing the installation of the RF Monitor software with USB drivers, the application software of the Logger which enables the restoration of the recorded measures, and the documentation.


    Cost of the Newsteo Logger Kit : 499.90 € excl. tax + preparation and delivery expenses.

    crypto

    * Required Fields