• Wireless measure for 0-10 Volt sensors

    Wireless logger for 0-10 Volt sensors

    The Newsteo solution enables any sensor conversion into a wireless sensor. Thus, it makes possible to visualize on a computer all the measurements done by sensors. The LGS35 allows connecting a 0-10V sensor but won't power it.

    Sensors to connect:

    Displacement
    Pressure
    Level
    Gas
    ...

    Product references:

    LGS35: wireless transmission and measurement system with 0-10 Volt interface
    LGS37: wireless transmission and measurement system with -50mV to + 50mV interface
    Connection cables: the client can connect the sensor of his choice


    How does it work ?

    1 - The Data Loggers
    They are spread in the area which has to be monitored. They send to the RF-to-USB key by radiofrequency the measures they take. They can be wireless configured and updated.

    2 - The RF-to-USB Key
    It is the bridge between the PC and the loggers

    3 - The RF Monitor
    This software is installed on the PC and allows the monitoring of the loggers

    The loggers can be used in two different modes:
    Recording

    Recording

    The logger records in its embedded memory the measures it takes. The user can download on the PC all the stored measures when he wants.


    Watch the video
    Monitoring

    Monitoring

    The logger sends in real time its measures to the PC. If a measure is not received by the PC, it stores it inside its internal memory and sends it to the PC on the next communication channel.

    Watch the video

  • Sensors Specifications

    LGS35 LGS37
    Type Logger with interface
    for sensor 0-10 V    		 Logger with interface
    -50mV to + 50mV
    Range of measure 0 ... 10 V -0.05 V to +0.05V
    Accuracy (without sensor) +/- 0.008 V +/- 1.6 µV
    Resolution 0.0003 V 1.6 µV
    Temperature Compensation Integrated temperature sensor
    Operating temperature -40°C to +85°C

    Casings Specifications



    Weight with battery
    250g

    Size
    98mm x 64mm x 34mm

    Battery
    AA (Lithium Thionyle) - 3,6V

    Antenna
    1/2 wave antenna (included)

    Casing
    Aluminium IP65

    Product Storage
    The product can be entirely set and then put in "hibernate" mode with its battery inserted. It will just be necessary to sweep a magnet on it to wake up it and to start the measurement.

    Encombrement Logger

    Other Specifications
    Sensor Position Inside the casing
    Memory Retention 100 years (flash memory technology)
    Battery Autonomy Up to 2 years (at 25°C with a frequency measure of 15 minutes)
    Measures Frequency Can be set from one measure every seconds to one every 4 hours
    Memory Capacity Up to 32 768 mesures with date and time.

  • SES55

    SES55

    Cable to connect the sensor of your choice to the LGS.
    The cable is provided with fast contactors.

  • Evaluate the Newsteo external temperature and humidity logger

    This kit enables you to evaluate the Newsteo Logger with 0-10 Volt interface.

    Kit LGS The kit is made of:

    A LGS35
    A cable SES55 to connect the sensor of your choice to the LGS
    A RF-to-USB Key medium-range (¼ wavelength antenna integrated)
    A CD-ROM containing the installation of the RF Monitor software with USB drivers, the application software of the Logger which enables the restoration of the recorded measures, and the documentation.

    Cost of the Newsteo Logger Kit : 464.90 € excl. tax + preparation and delivery expenses.

    crypto

    * Required Fields