• Range of data logger with PT100 for temperature monitoring

    Newsteo Data Logger for PT100

    Newsteo logger for PT100 is a device which enables to oversee at distance the temperature of an environment. The Logger can transfer the data directly on a monitoring computer by radio frequencies or can store the data in its memory.

    Product references:

    LGR30: This Logger is sold without sensor. You can connect by yourself the PT100 you want to.
    STE52: Newsteo PT100 probe range, directly connectable on the LGR30.

    Assets

    A compact design
    Miniature and easily integrate
    No wire, no plugs
    Easily removable

    Accurate wireless measures
    Very high precision of measure
    Wireless data transmission
    Wireless download of the recorded data
    Transfer through out the walls

    Freedom of use
    High battery autonomy
    High storage capacity

    How does it work ?

    1 - The Data Loggers
    They are spread in the area which has to be monitored. They send to the RF-to-USB key by radiofrequency the measures they take. They can be wireless configured and updated.

    2 - The RF-to-USB Key
    It is the bridge between the PC and the loggers

    3 - The RF Monitor
    This software is installed on the PC and allows the monitoring of the loggers

    The loggers can be used in two different modes:
    Recording

    Recording

    The logger records in its embedded memory the measures it takes. The user can download on the PC all the stored measures when he wants.


    Watch the video
    Monitoring

    Monitoring

    The logger sends in real time its measures to the PC. If a measure is not received by the PC, it stores it inside its internal memory and sends it to the PC on the next communication channel.

    Watch the video

  • Sensors Specifications

    Newsteo Logger for PT100
    Temperature Depending on the PT100 (max. range : -250 to +850°C)
    Accuracy +/- 0.24°C (without probe)*
    Resolution 0.08°C
    Temperature Compensation Integrated temperature sensor
    Casing Operating temperature -40°C to +85°C
    Certification COFRAC certification on order
    * The probe inaccuracy has to be added to the Logger inaccuracy. The accuracy is given for a cable at 25°C on its whole length (cable between the PT100 and logger) and correctly screwed on the Logger.

    Casings Specifications



    Weight with battery
    250g

    Size
    98mm x 64mm x 34mm

    Battery
    AA (Lithium Thionyle) - 3,6V

    Antenna
    1/2 wave antenna (included)

    Casing
    Aluminium IP65

    Product Storage
    The product can be entirely set and then put in "hibernate" mode with its battery inserted. It will just be necessary to sweep a magnet on it to wake up it and to start the measurement.

    Encombrement Logger

    Other Specifications
    Sensor Position Inside the casing
    Memory Retention 100 years (flash memory technology)
    Battery Autonomy Up to 2 years (at 25°C with a frequency measure of 15 minutes)
    Measures Frequency Can be set from one measure every seconds to one every 4 hours
    Memory Capacity Up to 32 768 mesures with date and time.

  • STE52-001

    STE51-001

    PT100 with sensor protected by a heat-shrinkable sleeve
    Range of measure : - 40° to + 60° C Class B
    IP68

    STE52-002

    STE52-002

    PT100 Temperature Probe – for food contact, angle probe to insert
    Range of measure : -50 à + 250 °C Class B
    IP67

    STE52-003

    STE52-002

    PT100 with 150mm inox connector
    Range of measure : -50° to 250°C Class B

    SES55

    SES55

    Cable to connect the PT100 of your choice to the LGR30.
    The cable is provided with fast contactors.

  • Evaluate the Logger for PT100


    crypto

    * Required Fields