• Range of data logger with PT100 for temperature monitoring

    Newsteo Data Logger for PT1000

    Newsteo logger for PT100 is a device which enables to oversee at distance the temperature of an environment. The Logger can transfer the data directly on a monitoring computer by radio frequencies or can store the data in its memory.

    Product references:

    LGR33: this Logger is sold without sensor. You can connect by yourself the PT1000 you want.
    STE53: Newsteo PT1000 probe, directly connectable on the LGR33

    Assets

    A compact design
    Miniature and easily integrate
    No wire, no plugs
    Easily removable

    Accurate wireless measures
    Very high precision of measure
    Wireless data transmission
    Wireless download of the recorded data
    Transfer through out the walls

    Freedom of use
    High battery autonomy
    High storage capacity

    How does it work ?

    1 - The Data Loggers
    They are spread in the area which has to be monitored. They send to the RF-to-USB key by radiofrequency the measures they take. They can be wireless configured and updated.

    2 - The RF-to-USB Key
    It is the bridge between the PC and the loggers

    3 - The RF Monitor
    This software is installed on the PC and allows the monitoring of the loggers

    The loggers can be used in two different modes:
    Recording

    Recording

    The logger records in its embedded memory the measures it takes. The user can download on the PC all the stored measures when he wants.


    Watch the video
    Monitoring

    Monitoring

    The logger sends in real time its measures to the PC. If a measure is not received by the PC, it stores it inside its internal memory and sends it to the PC on the next communication channel.

    Watch the video

  • Sensors Specifications

    Newsteo Logger for PT1000
    Temperature Depending on the PT1000 (max range : -250 to +850°C)
    Accuracy +/- 0.24°C (without probe)*
    Resolution 0.08°C
    Temperature Compensation Integrated temperature sensor
    Operating temperature -40°C to +85°C
    Certification COFRAC certification on order
    * The probe inaccuracy has to be added to the Logger inaccuracy. The accuracy is given for a cable at 25°C on its whole length (cable between the PT1000 and logger) and correctly screwed on the Logger.

    Casings Specifications



    Weight with battery
    250g

    Size
    98mm x 64mm x 34mm

    Battery
    AA (Lithium Thionyle) - 3,6V

    Antenna
    1/2 wave antenna (included)

    Casing
    Aluminium IP65

    Product Storage
    The product can be entirely set and then put in "hibernate" mode with its battery inserted. It will just be necessary to sweep a magnet on it to wake up it and to start the measurement.

    Encombrement Logger

    Other Specifications
    Sensor Position Inside the casing
    Memory Retention 100 years (flash memory technology)
    Battery Autonomy Up to 2 years (at 25°C with a frequency measure of 15 minutes)
    Measures Frequency Can be set from one measure every seconds to one every 4 hours
    Memory Capacity Up to 32 768 mesures with date and time.

  • STE53-001



    PT1000 with sensor protected by a heat-shrinkable sleeve
    Range of measure : - 40° to + 60° C Class B
    IP68 (within 4 meters of water)
    Recommended for use in clear and neutral water, for 1 hour session.

    STE53-002



    Probe with stainless steel of 20mm
    Range of measure : -40 to + 500 °C Class B
    IP60

    STE53-003


    PT1000 stainless steel 316L
    Measurement range: -50 ° to 180 ° C
    Operating range (cable and PT1000, without connector): -50 ° to 180 ° C (for use in a liquid, at a temperature higher than 100°C, consult us).
    Dimensions:
    - Probe: length 100 mm, diameter: 6 mm
    - Cable: Length: 1000 mm, diameter: 4.5 mm
    Cable flexible silicone
    Sealing:
    - Probe : IP68 (within 1 meter of water)
    - Cable : IP68 (within 1 meter of water)

    STE53-005

    Sonde STE53-005

    PT1000 probe for use through refrigerator door
    Measurement range : -40° to +60°C
    Dimensions :
    - External cable: length : 2000 mm, diameter : 6 mm
    - Ribbon cable (to be put on the door openning) : length : 400 mm, thickness : 0.5 mm
    (the ribbon cable is an extension of the external cable)
    - Plastic housing including PT1000: 35 mm x 35 mm x 20 mm
    IP level : IP68

    SES55



    Cable to connect the PT1000 of your choice to the LGR33
    The cable is provided with fast contactors.

  • Evaluate the Logger for PT1000

    This kit enables you to estimate the Newsteo Logger PT1000.

    Kit LGR The kit is made of:
    A Newsteo Logger LGR33
    A PT1000 probe (STE53-003)
    A RF-to-USB Key medium-range (¼ wavelength antenna integrated)
    A CD-ROM containing the installation of the RF Monitor software with USB drivers, the application software of the Logger which enables the restoration of the recorded measures, and the documentation.

    Cost of the Newsteo Logger Kit : 459.90 € excl. tax + preparation and delivery expenses.

    crypto

    * Required Fields