• Newsteo data logger with 2 sensors temperature probe

    Newsteo data logger with 2 sensors temperature probe

    The LGR46 Logger is equipped with a double external probe temperature accurate to ± 0.3 ° C. The Logger sends by radio to the supervision centre all the measures done by the sensors. The logger can also store the measures in its embedded memory.

    This product has been specially designed for heating engineers, sanitary and hot water networks surveillance.
    double sonde temperature

    Ordering references::

    LGR46 : logger making measure and radio transmission.
    STT51 : probe with 2 temperature sensors that can be connected directly to the LGR46.

    Assets

    A compact design
    Miniature and easily integrate
    No wire, no plugs
    Easily removable

    Accurate wireless measures
    Very high precision of measure
    Wireless data transmission
    Wireless download of the recorded data
    Transfer through out the walls

    Freedom of use
    High battery autonomy
    High storage capacity

    How does it work ?

    1 - The Data Loggers
    They are spread in the area which has to be monitored. They send to the RF-to-USB key by radiofrequency the measures they take. They can be wireless configured and updated.

    2 - The RF-to-USB Key
    It is the bridge between the PC and the loggers

    3 - The RF Monitor
    This software is installed on the PC and allows the monitoring of the loggers

    The loggers can be used in two different modes:
    Recording

    Recording

    The logger records in its embedded memory the measures it takes. The user can download on the PC all the stored measures when he wants.


    Watch the video
    Monitoring

    Monitoring

    The logger sends in real time its measures to the PC. If a measure is not received by the PC, it stores it inside its internal memory and sends it to the PC on the next communication channel.

    Watch the video

  • Sensors Specifications

    LGR46 - STT51 probe
    Sensors 2 digital Temperature Sensors
    Temperature measure range -40°C ... +100°C
    Accuracy +/- 0.3°C
    Certification COFRAC on order
    LGR temperature or use -40°C to +85°C

    Casings Specifications



    Weight with battery
    250g

    Size
    98mm x 64mm x 34mm

    Battery
    AA (Lithium Thionyle) - 3,6V

    Antenna
    1/2 wave antenna (included)

    Casing
    Aluminium IP65

    Product Storage
    The product can be entirely set and then put in "hibernate" mode with its battery inserted. It will just be necessary to sweep a magnet on it to wake up it and to start the measurement.

    Encombrement Logger

    Other Specifications
    Sensor Position Inside the casing
    Memory Retention 100 years (flash memory technology)
    Battery Autonomy Up to 2 years (at 25°C with a frequency measure of 15 minutes)
    Measures Frequency Can be set from one measure every seconds to one every 4 hours
    Memory Capacity Up to 32 768 mesures with date and time.

  • STT51-001

    Newsteo temperature probe with two integrated temperature sensors
    Measure range : -40°C ... +100°C
    Accuracy :
    +/- 0.3°C (-30°C ... +60°C)
    +/- 1°C (-40°C ... -30°C and +60°C...+100°C)
    Total Lenght : 5 meters. The cable split up after 3 meters. (Both probes are indepedants from each other upon 2 meters.)


    double sonde temperature

  • Evaluate the Newsteo double probe temperature logger


    crypto

    * Required Fields