• Newsteo data logger with 2 sensors temperature probe

    Newsteo Logger Temperature, wireless temperature measure.

    The Loggers LOG56 and LOG66 are equiped with 2 temperature sensors : one placed in the main casing, the other one in an external probe. The Loggers send by radio to the supervision centre all the measures done by the sensors. The loggers can also store the measures in their embedded memories.

    Thanks to its 2 sensors, the logger allows measurement of 2 parallel environments:
    Inside and outside a refrigerator
    Temperature at the top and at the bottom inside a refrigerator
    ...

    This logger comes in 2 versions depending on the inertia of measurement.


    How does it work ?

    1 - The Data Loggers
    They are spread in the area which has to be monitored. They send to the RF-to-USB key by radiofrequency the measures they take. They can be wireless configured and updated.

    2 - The RF-to-USB Key
    It is the bridge between the PC and the loggers

    3 - The RF Monitor
    This software is installed on the PC and allows the monitoring of the loggers

    The loggers can be used in two different modes:
    Recording

    Recording

    The logger records in its embedded memory the measures it takes. The user can download on the PC all the stored measures when he wants.


    Watch the video
    Monitoring

    Monitoring

    The logger sends in real time its measures to the PC. If a measure is not received by the PC, it stores it inside its internal memory and sends it to the PC on the next communication channel.

    Watch the video
  • Sensors Specifications

    LOG56 LOG66
    Operating temperature -40°C ... +70°C -40°C ... +70°C
    Accuracy of the 2 sensors +/- 0.3°C +/- 0.3°C
    Certification COFRAC on order
    Resolution 0.1°C 0.1°C


    Casing Specifications



    Weight with battery
    250g

    Size
    Main casing with sensor 1 :
    96mm x 40mm x 20mm

    Cable connected to sensor 2 :
    Cable length : 2 meters Cable diameter : 3.8 mm

    Sensor 2 tip :
    LOG56 : stainless steel tip LOG66 : small plastic casing 35 x 35 x 20 mm

    Battery
    1/2 AA (Lithium Thionyl) -3,6 V

    Antenna
    1/4 wave antenna (included), can be unscrewed

    Casing
    ABS IP54 (Non Condensed Atmosphere)

    Product Storage
    The product can be entirely set and then put in "hibernate" mode with its battery inserted. It will just be necessary to sweep a magnet on it to wake up it and to start the measurement.




    Other Specifications

    Autonomy @ 25°C Up to 2 years
    At 25°C with a frequency measures of 15 minutes. Average value which can slightly vary depending on the use.
    RF Range 30m to 1Km, depending on the antenna shape
    Memory Capacity 32 256 measures with date and time
    Transmission Frequency ISM 868 MHz


  • Evaluate the Newsteo Temperature Logger with 2 sensors


    crypto

    * Required Fields