• Newsteo Logger to turn any impulse sensor into wireless sensor

    Newsteo Logger for impulse sensor

    The Newsteo Logger LGS39 allows you to connect any type of impulse sensor (flowmeter, rain gauge...). The Logger sends by radio to the supervision centre all the measures done by the sensor. The logger can also store the measures in its embedded memory. It is available with ATEX (Explosive Atmospheres) Zone 2 certification, specially designed for remote reading of gas meters.

    Sensors to connect:
    Rain gauge
    Flowmeter
    Gas meter, remote metering

    Product references:

    LGS39: wireless transmission and measurement system with impulse sensor interface
    LGSA9: wireless transmission and measurement system with impulse sensor interface, ATEX certification
    Linking cable: the client can connect the sensor of his choice.

    How does it work ?

    1 - The Data Loggers
    They are spread in the area which has to be monitored. They send to the RF-to-USB key by radiofrequency the measures they take. They can be wireless configured and updated.

    2 - The RF-to-USB Key
    It is the bridge between the PC and the loggers

    3 - The RF Monitor
    This software is installed on the PC and allows the monitoring of the loggers

    The loggers can be used in two different modes:
    Recording

    Recording

    The logger records in its embedded memory the measures it takes. The user can download on the PC all the stored measures when he wants.


    Watch the video
    Monitoring

    Monitoring

    The logger sends in real time its measures to the PC. If a measure is not received by the PC, it stores it inside its internal memory and sends it to the PC on the next communication channel.

    Watch the video

  • Sensors Specifications

    Newsteo LGS39 Newsteo LGSA9 Newsteo LGS79
    Type Logger for Impulse sensor
    Impulse frequency 0 to 10 Hz
    Minimum pulse duration 20 ms
    Commutation type Dry contact or CMOS 0-3.5V
    Temperature compensation Integrated temperature sensor
    Operating temperature -40°C to +85°C
    Certifications CE CE
    ATEX Zone 2 gas    		 CE
    Power supply By internal battery By internal battery On main power supply

    Casings Specifications



    Weight with battery
    250g

    Size
    98mm x 64mm x 34mm

    Battery
    AA (Lithium Thionyle) - 3,6V

    Antenna
    1/2 wave antenna (included)

    Casing
    Aluminium IP65

    Product Storage
    The product can be entirely set and then put in "hibernate" mode with its battery inserted. It will just be necessary to sweep a magnet on it to wake up it and to start the measurement.

    Encombrement Logger

    Other Specifications

    LGS39 LGSA9 LGS79
    Battery Autonomy Up to 2 years (at 25°C with a frequency measure of 15 minutes) Illimited
    Power supply: 5 to 24 V
    Newsteo transformer available on request (reference ADAPT-003)
    Memory Retention 100 years (flash memory technology)
    Radio transmission Can be set from one measure every seconds to one every 4 hours
    Memory Capacity Up to 32 768 mesures with date and time.

  • SES55

    SES55

    Cable to connect the sensor of your choice to the LGS.
    The cable is provided with fast contactors.

  • Evaluate the Newsteo logger with impulse sensor interface


    This kit enables you to evaluate the Newsteo Logger with impulse interface.

    Kit LGS The kit is made of:

    A LGS39
    A cable SES55 to connect the sensor of your choice to the LGS
    A RF-to-USB Key medium-range (¼ wavelength antenna integrated)
    A CD-ROM containing the installation of the RF Monitor software with USB drivers, the application software of the Logger which enables the restoration of the recorded measures, and the documentation.

    Cost of the Newsteo Logger Kit : 464.90 € excl. tax + preparation and delivery expenses.

    crypto

    * Required Fields