• data logger to connect any type of switch off device and to turn it into wireless device

    NEWSTEO LOGGER to turn every sensor into wireless switch-off sensor

    The Newsteo Logger LGS36 allows you to connect any type of switch-off sensor (ON/OFF type). The Logger sends by radio to the supervision centre all the measures done by the sensor. The logger can also store the measures in its embedded memory.

    Sensors to connect

    Switch
    Contact
    ...

    Product references

    LGS 36: wireless transmission and measurement system with switch-off sensor interface, 2 inputs
    LGS 76: wireless transmission and measurement system with switch-off sensor interface, supplied on main current, 2 inputs
    Connection cables: the client can connect the sensor of his choice.


    How does it work ?

    1 - The Data Loggers
    They are spread in the area which has to be monitored. They send to the RF-to-USB key by radiofrequency the measures they take. They can be wireless configured and updated.

    2 - The RF-to-USB Key
    It is the bridge between the PC and the loggers

    3 - The RF Monitor
    This software is installed on the PC and allows the monitoring of the loggers

    The loggers can be used in two different modes:
    Recording

    Recording

    The logger records in its embedded memory the measures it takes. The user can download on the PC all the stored measures when he wants.


    Watch the video
    Monitoring

    Monitoring

    The logger sends in real time its measures to the PC. If a measure is not received by the PC, it stores it inside its internal memory and sends it to the PC on the next communication channel.

    Watch the video

  • Sensors Specifications

    LGS36 LGS76
    Type Logger for switch-off sensor
    Number of inputs 2
    Range of measure 0 / 1 (10 Hz)
    Temperature Compensation Integrated temperature sensor
    Operating temperature -40°C to +85°C
    Power supply By battery On main power supply

    Casings Specifications



    Weight with battery
    250g

    Size
    98mm x 64mm x 34mm

    Battery
    AA (Lithium Thionyle) - 3,6V

    Antenna
    1/2 wave antenna (included)

    Casing
    Aluminium IP65

    Product Storage
    The product can be entirely set and then put in "hibernate" mode with its battery inserted. It will just be necessary to sweep a magnet on it to wake up it and to start the measurement.

    Encombrement Logger

    Other Specifications

    LGS36 LGS76
    Battery Autonomy Up to 2 years (at 25°C with a frequency measure of 15 minutes) Illimited
    Power supply: 5 to 24 V
    Newsteo transformer available on request (reference ADAPT-003)
    Memory Retention 100 years (flash memory technology)
    Radio transmission Can be set from one measure every seconds to one every 4 hours
    Memory Capacity Up to 32 768 mesures with date and time.

  • SES55

    SES55

    Cable to connect the sensor of your choice to the LGS.
    The cable is provided with fast contactors.

  • Evaluate the Newsteo wireless switch off logger


    crypto

    * Required Fields