• Data logger range for wireless temperature supervision.

    Newsteo Logger Temperature, wireless temperature measure.

    The Newsteo logger temperature is a device which enables to oversee at distance the temperature of an environment. The measures are displayed on a computer. The temperature datalogger can transfer the data in real-time to it by radio frequencies or can store the data in its memory.

    The product is available into several versions depending on the needed precision, the signal range, and the casing. (See Technical Specifications).

    LOM16 : ± 0.3°C Accuracy, IP67 casing, 200m radio range
    LOG11 : ± 0.6°C Accuracy, IP54 casing, 30m radio range
    LOG21 : ± 0.6°C Accuracy, IP54 casing, 800m radio range
    LOG26 : ± 0.3°C Accuracy, IP54 casing, 800m radio range
    LOG31 : ± 0.6°C Accuracy, IP65 casing, 800m radio range
    LOG36 : ± 0.3°C Accuracy, IP65 casing, 800m radio range, EN12830 certified
    LGRB6 : ± 0.3°C Accuracy, IP65 casing, 800m radio range, ATEX Zone 2 gas certified

    Assets

    A compact design
    Miniature and easily integrate
    No wire, no plugs
    Easily removable

    Accurate wireless measures
    Very high precision of measure
    Wireless data transmission
    Wireless download of the recorded data
    Transfer through out the walls

    Freedom of use
    High battery autonomy
    High storage capacity

    How does it work ?

    1 - The Data Loggers
    They are spread in the area which has to be monitored. They send to the RF-to-USB key by radiofrequency the measures they take. They can be wireless configured and updated.

    2 - The RF-to-USB Key
    It is the bridge between the PC and the loggers

    3 - The RF Monitor
    This software is installed on the PC and allows the monitoring of the loggers

    The loggers can be used in two different modes:
    Recording

    Recording

    The logger records in its embedded memory the measures it takes. The user can download on the PC all the stored measures when he wants.


    Watch the video
    Monitoring

    Monitoring

    The logger sends in real time its measures to the PC. If a measure is not received by the PC, it stores it inside its internal memory and sends it to the PC on the next communication channel.

    Watch the video

  • Sensors Specifications

    LOG11 LOG21 - LOG26 LOG31 - LOG36 LGRB6 LOM16
    Operating Temperature -40°C ... +70°C -40°C ... +70°C -40°C ... +85°C -40°C ... +85°C -40°C ... +60°C
    Accuracy +/- 0.6°C LOG21 : +/- 0.6°C
    LOG26 : +/- 0.3°C    		 LOG31 : +/- 0.6°C
    LOG36 : +/- 0.3°C    		 +/- 0.3°C +/- 0.3°C
    Temperature Resolution 0.1°C 0.1°C 0.1°C 0.1°C 0.1°C
    Signal range (in free field) 30m Up to 800m Up to 900m Up to 900m Up to 200m
    Certification CE CE CE
    LOG36 : EN12830    		 CE
    ATEX Zone 2 gas    		 CE
    COFRAC Certification COFRAC certification on order

    LOG11 - LOG21 - LOG26 Casings Specifications



    Weight with battery
    60g

    Size
    96mm x 40mm x 20 mm

    Battery
    1/2 AA (Lithium Thionyle) - 3,6V

    Antennas
    LOG11: Ceramic Antenna inside the product
    LOG21: 1/4 wave antenna (included), cannot be unscrewed
    LOG26 : 1/4 wave antenna (included), can be unscrewed

    Casing
    ABS IP54 (Non Condensed Atmosphere)

    Product Storage
    The product can be entirely set and then put in "hibernate" mode with its battery inserted. It will just be necessary to sweep a magnet on it to wake up it and to start the measurement.



    Encombrement Logger






    LOG31 - LOG36 Casings Specifications



    Weight with battery
    250g

    Size
    98mm x 64mm x 34mm

    Battery
    AA (Lithium Thionyle) - 3,6V

    Antenna
    1/2 wave antenna (included)

    Casing
    Aluminium IP65

    Product Storage
    The product can be entirely set and then put in "hibernate" mode with its battery inserted. It will just be necessary to sweep a magnet on it to wake up it and to start the measurement.

    Encombrement Logger

    LGR-B6 Casing Specifications

    Same as LOG31 - LOG36.
    Delivered with a fixation base.

    LOM16 Casing Specifications

    Weight with battery
    26g

    Size
    Height: 90mm
    Thinnest: 22mm
    Thickest: 26mm

    Battery
    1/2 AA Lithium Thyionle, can be changed by the user

    Antenna
    Integrated antenna, inside the casing

    Casing
    IP67 Plastic

    Other Specifications
    Sensor Position Inside the casing
    Memory Retention 100 years (flash memory technology)
    Battery Autonomy Up to 2 years (at 25°C with a frequency measure of 15 minutes)
    Measures Frequency Can be set from one measure every seconds to one every 4 hours
    Memory Capacity Up to 32 768 mesures with date and time.

  • Evaluate the Newsteo Temperature Logger : LOG26 Wireless Temperature kit


    Kit Logger This kit enables you to estimate a ready-to-use product, the Newsteo Logger (integrating measure, storage and timestamp of temperature).

    The kit is made of:

    A Newsteo Logger LOG26
    A RF-to-USB Key medium-range (¼ wavelength antenna integrated)
    A CD-ROM containing the installation of the RF Monitor software with USB drivers, the application software of the Logger which enables the restoration of the recorded measures, and the documentation.


    Cost of the Newsteo Logger Kit : 354.90 € excl. tax + preparation and delivery expenses.

    LOM16 kit

    Kit to evaluate the LOM16 (reference: PFKI-LOM16-001). The kit is made of:

    2 x Newsteo mini-Logger LOM16
    A RF-to-USB Key medium-range (¼ wavelength antenna integrated)
    A CD-ROM containing the installation of the RF Monitor software


    Cost of the Newsteo LOM16 Kit : 299.90 € excl. tax + preparation and delivery expenses.

    Beyond the first purchase, the Temperature Mini-Loggers LOM16 are sold in packs of 5 pieces (reference PFKI-LOM16-002).

    Contact us:

    crypto

    * Required Fields