Newsteo Logger for impulse sensor
The Newsteo Logger LGS39 allows you to connect any type of impulse sensor (flowmeter, rain gauge...). The Logger sends by radio to the supervision centre all the measures done by the sensor. The logger can also store the measures in its embedded memory.
Sensors to connect:
Product references:
- LGS39: wireless transmission and measurement system with impulse sensor interface
- Linking cable : the client can connect the sensor of his choice.
How does it work ?
1 -
The Data Loggers
They are spread in the area which has to be monitored. They send to the RF-to-USB key by radiofrequency the measures they take. They can be wireless configured and updated.
2 -
The RF-to-USB Key
It is the bridge between the PC and the loggers
3 -
The RF Monitor
This software is installed on the PC and allows the monitoring of the loggers
The loggers can be used in two different modes:
Recording
The logger records in its embedded memory the measures it takes. The user can download on the PC all the stored measures when he wants.
Watch the video
Monitoring
The logger sends in real time its measures to the PC. If a measure is not received by the PC, it stores it inside its internal memory and sends it to the PC on the next communication channel.
Watch the video
