• If it is possible, move the data logger closer to the gateway (CUB, COL …) and pass a magnet on the data logger. Press once on the ACK button on the back of the collector (for COL) or press the joystick (CUB), wait 20 minutes and check on Webmonitor that your measurements appear.
  • If the measurements do not appear, change the battery of the data logger and repeat the test above
  • If you do not have physical access to the data logger, use the RFmonitor software and connect the Newsteo USB radio key.
  • Check that you are connected to the recorders on the RFMonitor software