Wireless transmission for -5 to +5 volt sensor
Industrial wireless data logger
Wireless logger -5 Volt … +5 Volt sensors, 5 inputs
The wireless Newsteo logger converts any -5 … +5 Volt sensor into wireless sensor. This multi-sensor recorder allows to connect 5 sensors and power them.
Product references:
LGN45: wireless transmission and measurement system, 5 inputs, -5 V to +5 V interface
- Connection cables: the client can connect the sensor of his choice
Sensors to connect:
- Inclinometer
- CTN
- …
Who uses the Newsteo datalogger with -5 V…+5 V voltage level interface?
Sensor users: move from a wired connection to a wireless connection, safer, faster to install and less expensive
How does it work?
Installing recorders / Data Loggers
Technical specifications of the Newsteo logger LGN45, for -5 V … +5 V sensors
Product type
Logger with interface for -5 V…+5 V sensor
Reference
PFPN-LGN45-001
Input number
5 inputs
Measurement range
-5 V…+5 V
Sensor power
13.6 V
Maximum consumption : 20mA (per sensor) meaning 100mA max on the line
Accuracy (without sensor)
± 0.1 % of full scale
Resolution
24 bits over the entire range, or 0.6 µV
Operating temperature
-40°C to +85°C
Temperature measurement
Integrated temperature sensor on the electronic board
Measurement frequency
Can be set from one measure every second to one every 4 hours
Memory Capacity
16000 sets of measurements (a measurement set includes the measurement of each 5 channels + Temperature + Timestamp)
Measurement securisation
Acknowledgment process between the transmitter and the receiver to ensure that no data is lost during radio transmission
Back-up of the last 32.000 measurements in Logger memory even after transmission to the receiver
Sensor connection
Through connector available on the logger. Requires a cable for connection, available on request.
> See the available connection cable
Battery
1 C-size spiral cell 3.6 V 5.8Ah
Accessible and user replaceable battery
Battery life @ 25°C
8 months in the following conditions of use:
– Frequency of acquisition of 15 minutes
– 5 channels activated with a consumption of 20 mA per channel
Up to 3 years using two C-size bobbin-type batteries 3.6 V.
Dimensions
Width: 125.4 mm + Type N female connector
Depth: 80.4 mm + Type M12 female connector
Height: 58.80 mm
Weight with battery
About 280g
Casing
Aluminium casing (4 mm)
Fixation support provided screwed in the casing for screwing in 4 points or strapping through 2 holes
IP level
IP66
Thermal protection
White thermoformed case for solar and thermal protection
Radio frequency
ISM 868 MHz
Radio range
Up to 900 meters (with supplied antenna)
Antenna
1/2 wave antenna (included)
Connection cables for data logger
PFPN-SES58-001
- Cable to connect the sensor of your choice to the LGN.
- The cable is provided with fast contactors
