Reach us: +44 203 445 5279

Voltage level (0-10 V…)

Voltage level (0-10 V…) 2017-06-08T16:12:25+00:00

Wireless datalogger for sensor with voltage level: 0 … 10 V, 0 … 2.5 V, -50 mV to +50 mV

The Newsteo data loggers can transform any sensor with a voltage level into a wireless sensor. The client uses its sensor that connects directly to the Newsteo logger. The datalogger can transmit the sensor measurements but does not supply power.
The Logger can transmit data directly on a monitoring computer by radio frequencies or can store them in its memory waiting for the remote reading.

Product references:

  • LGS35: wireless transmission and measurement system with 0-10 Volt interface
  • LGS33: wireless transmission and measurement system with 0-2.5 Volt interface
  • LGS37: wireless transmission and measurement system with -50mV to + 50mV interface
  • Connection cables: the client can connect the sensor of his choice

Sensors to connect:

  • Displacement
  • Pressure
  • Level
  • Gas
Call me back

Newsteo is at your service

We are at your service to inform you. Click on the button and we call you back.
Call me back

Where the measurements will be displayed ?

2 choices to create your wireless sensor network:

  • Local single-site solution: you have a small installation (some dataloggers, located near the supervisory position). In this case, the RF Monitor software is appropriate. You install this software on a computer and connect the RF-to-USB Key (radio receiver, provided by Newsteo) to a USB port.

    > More about single-site solution

  •  

  • Multi-site solution with remote monitoring: you want to display the measurements of your dataloggers via different PCs located in different sites. The Newsteo Cloud offer allows you to send all the measurements of your recorders to the cloud and access it through a Web application, WebMonitor.

    > More about multi-sites installations

Who uses the Newsteo datalogger with voltage level interface?

  • Sensor users: move from a wired connection to a wireless connection, safer, faster to install and less expensive

How does it work?

Installing recorders / Data Loggers

Technical specifications og the Newsteo wireless dataloggers with voltage level interface

Type

LGS35: Logger with interface for sensor 0-10 V

LGS33: Logger with interface for sensor 0-2.5 V

LGS37: Logger with interface -50mV to + 50mV

References

PFPN-LGS35-001
PFPN-LGS33-001
PFPN-LGS37-001

Range of measure

LGS35: 0…10 V
LGS33:  0… 2.5 V
LGS37: -0.05 V … +0.05V

Accuracy (without sensor)

LGS35: ± 0.008 V
LGS37: ± 1.6 µV

Resolution

LGS35: 0.0003 V
LGS37: 1.6 µV

Operating temperature

-40°C … +85°C

Temperature measurement

Integrated temperature sensor

Measurement frequency

Can be set from one measure every seconds to one every 4 hours

Memory Capacity

Up to 32 768 mesures with date and time.

Measurement securisation

Acknowledgment process between the transmitter and the receiver to ensure that no data is lost during radio transmission
Back-up of the last 32.000 measurements in Logger memory even after transmission to the receiver

Sensor connection

Through connector available on the top of the logger

>Newsteo connection cable

Battery

AA Lithium Thionyle (3,6V) included, special design with plug to maintain the battery
Accessible and user replaceable battery
Optional: dual battery pack to double battery life

Autonomy

Up to 3 years (at 25°C with a frequency measure of 15 minutes)

See Battery life estimation

Dimensions

98mm x 64mm x 34mm

Weight with battery

250g

Casing

Aluminium

IP level

IP65

Radio frequency

ISM 868 MHz

Radio range

Up to 900 meters (with supplied antenna)

Antenna

1/2 wave antenna (included)

Connection cables for data logger

PFPN-SES55-001

  • Cable to connect the sensor of your choice to the LGS.
  • The cable is provided with fast contactors.
TRY IT

Evaluate the Newsteo Wireless Datalogger

This kit enables you to evaluate the Newsteo Logger with 0-10 Volt interface.
The kit is made of:

  • A Newsteo wireless datalogger LGS35
  • A cable SES55 to connect the sensor of your choice to the LGS
  • A RF-to-USB Key medium-range (¼ wavelength antenna integrated)
  • A CD-ROM containing the installation of the RF Monitor software with USB drivers, the application software of the Logger which enables the restoration of the recorded measures, and the documentation.

Price of the kit: 520 EUR excl. VAT, preparation and shipping costs in addition.

TRY IT